2020 Equinox Lug Nut Torque (2024)

FAQs

What is the torque spec of the 2020 Equinox? ›

A 1.5L 4-cylinder turbocharged engine comes standard in the 2020 Chevy Equinox. This engine provides 170 horsepower and 203 lb-ft of torque.

The REFERENCE torque spec for the lug nuts on a 1999-2024 Chevy Silverado 1500 will be 140 – 190 Nm (just for REFERENCE, please inquire with a tire expert). Since the lug nuts are standard components that are used to secure the wheel to your pickup truck.

The owner's manual specifies 140 Nm or 100 lb/FT torque!! Overtorquing can strip the threads and may cause you to have to replace the wheel bearing!!! The 2018 chevy equinox lug nut torque is 100 foot pounds.

M12x1. 5 Bulge Acorn Wheel Lug Nut (3/4" Hex - Conical Seat)

Torque specifications are the values that indicate how much force should be applied to a bolt. These values are usually given in Newton meters (Nm) or foot-pounds (ft-lbs). Torque specifications are essential because they ensure that bolts are tightened to the correct level.

It depends on the car model, rim size, design (aluminium or steel rims) and number of bolts. It is normally between 110 N⋅m and 120 N⋅m. If you change the rims on your car, you will find the new torque values in the rim certificate.

Run the lug nuts in with your favorite tool until snug, but no more. Tighten the lug nuts in a star pattern twice, smoothly applying force until the wrench clicks, but no further.

For most passenger vehicles equipped with standard lug nuts, a 1/2 inch drive impact wrench providing around 300-400 ft-lbs of torque is sufficient. This covers common lug nut sizes of 14-21 mm on sedans, coupes, hatchbacks and some light trucks or SUVs.

The hex size of your 2023 Chevy Equinox lug nuts is 7/8″, so you would need a 22mm hex socket to fit. Whether you use a lug wrench, torque wrench, impact socket, or regular socket, you'll need the correct size to remove or tighten 2023 Chevy Equinox lug nuts.

What is the torque on the lug nuts on a 2015 Chevy Equinox? ›

The manual says the wheel lug nut torque is 140 lb. ft.

1/2 -Inch Torque Wrench

It is the best tool if you are working with lug nuts or anywhere on the vehicle suspension. It is suitable for large bolts and nuts like those in engine mounts. Basically, any tightening task for both transmission and suspension, including motorcycles, would require a 1/2 -inch torque wrench.

Most vehicles have lug nuts that require around 100 pound-feet of torque. However, certain vehicles require more or less. It's best to check your vehicle's manual to find out the exact specifications you need.

For most cars, I use 90 lbs. -feet, and 100 on light trucks using a slightly larger diameter lug. On a smaller car I might use 85 pounds feet. That 90 lbs.

Where To Find The Correct Manufacturer Recommended Torque Specs. The torque specs for the axle nut (and other nuts and bolts) should be listed in the dealership/shop guide provided by the manufacturer. If you can't find that information, or if you don't have a guide, you can find the specs in the service manual.

Tighten the bolts in the sequence shown below to 22 FT/LBS (30 Nm).

2020 Chevy Equinox Fuel Economy Details

1.5L Turbo 4-cylinder with AWD: EPA-estimated 25 mpg city/30 mpg highway. 2.0L Turbo 4-cylinder with FWD: EPA-estimated 22 mpg city/29 mpg highway.

Performance. How does the Equinox drive? Upgrading from the base 1.5-liter engine to the 2.0-liter is well-justified because of the amount of power and efficiency the bigger engine delivers. The Equinox does 0-60 mph in just 6.8 seconds, which it quicker than almost every other compact crossover.

Engine Options: To compare the new Chevrolet Equinox LS vs. LT is to note the vast difference in engine options. While the Equinox LS only has the 175-hp 1.5L turbocharged I4, yielding 26 mpg city and 31 mpg highway, the LT has an available 252-hp engine upgrade alongside the standard 1.5L turbocharged I4.